2018年主要论文一览表
序 号 |
第一 作者 |
论文题目 |
发表刊物/论文集 |
论文 收录 |
发表 时间 |
1 |
储茂祥 |
Twin support vector machine local structural information for pattern classification |
IEEE ACCESS |
SCI |
2018 |
2 |
王征 |
Backstepping-Based Lyapunov Function Construction Using Approximate Dynamic Programming and Sum of Square Techniques |
IEEE TRANSACTIONS ON CYBERNETICS |
SCI |
2018 |
3 |
李长军 |
Theoretical consideration on convergence of the fixed-point iteration method in CIE mesopic photometry system MES2 |
Optics Express |
SCI |
2018 |
4 |
朱连成 |
Optimised Power Error Comparison Strategy for Direct Power Control of the Open-winding Brushless Doubly-Fed Wind Power Generator |
IEEE Transactions on Sustainable Energy |
SCI |
2018 |
5 |
李长军 |
Comparing two-step and one-step chromatic adaptation transforms using the CAT16 model |
Color Research & application |
SCI |
2018 |
6 |
储茂祥 |
Multi-class classification method for strip steel surface defects based on support vector machine with adjustable hyper-sphere |
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL |
SCI |
2018 |
7 |
储茂祥 |
Multi-class classification method using twin support vector machines with multi-information for steel surface defects |
Chemometrics and Intelligent Laboratory Systems |
SCI |
2018 |
8 |
Fengge Zhang |
Controller Strategy for Open-Winding Brushless Doubly Fed Wind Power Generator With Common Mode Voltage Elimination |
IEEE Transactions on Industrial Electronics |
SCI |
2018 |
9 |
李小华 |
Backstepping-based decentralized adaptive neural H∞ tracking control for a class of large-scale nonlinear interconnected systems |
Journal of the Franklin Institute |
SCI |
2018 |
10 |
巩荣芬 |
steel surface defect cllassification using multiple hyper-sphere support vector machine with additional information |
chemometrics and intelligent laboratory systems |
SCI |
2018 |
11 |
樊松 |
APPLICATION OF INDEPENDENT COMPONENT ANALYSIS WITH SEMI-SUPERVISED LAPLACIAN REGULARIZATION KERNEL DENSITY ESTIMATION |
CANADIAN JOURNAL OF CHEMICAL ENGINEERING |
SCI |
2018 |
12 |
张新贺 |
Low-Complexity Detection Algorithms for Spatial Modulation MIMO Systems |
Journal of Electrical and Computer Engineering |
EI |
2018 |
13 |
高闯 |
End-point prediction of basic oxygen furnace (BOF) steelmaking based on improved twin support vector regression |
Metalurgija |
EI |
2018 |
14 |
朱海波 |
IMPROVED BAT ALGORITHM WITH NOVEL SEARCH MECHANISM AND ONE-DIMENSIONAL PERTURBATION LOCAL SEARCH STRATERY |
IJICIC |
EI |
2018 |
15 |
武志涛 |
直线电机驱动 XY 平台精密轮廓跟踪控制 |
中国电机工程学报 |
EI |
2018 |
16 |
武志涛 |
一种永磁直线电机驱动 X-Y 平台精密轮廓跟踪控制策略 |
电工技术学报 |
EI |
2018 |
17 |
王玉昆 |
独立局部搜索与多区域渐近收敛的新型PSO算法 |
控制与决策 |
EI |
2018 |
18 |
樊松 |
Vision-Based Motion Process Monitoring Using Bayesian Fault Diagnosis |
7th IEEE Annual International Conference on CYBER Technology in Automation, Control, and Intelligent Systems, CYBER 2017 |
EI |
2018 |
19 |
王玉峰 |
A kind of electric actuator controller solving the problem of motor concussion |
Proceedings of 2018 IEEE International Conference on Mechatronics and Automation |
EI |
2018 |
20 |
王玉峰 |
Design of residual oxygen measurement system |
Proceedings of the 37th Chinese Control Conference |
EI |
2018 |
21 |
樊松 |
Vision-Based Fault Classification for Monitoring Industrial Robot |
Proceedings of the 37th Chinese Control Conference, CCC 2018 |
EI |
2018 |
22 |
曹小洁 |
Backstepping-based Robust H∞ Tracking Controller Design for a Class of Nonlinear Systems |
Proceedings of the 37th Chinese Control Conference |
EI |
2018 |
23 |
朱晶 |
Prediction of concentrate grade and recovery rate of tailings in the process of production based on chaotic ant colony algorithm |
CCDC,2018 |
EI |
2018 |
24 |
张勇 |
Application of adaptive fractional order control in wire rod looper system |
CCDC,2018 |
EI |
2018 |
25 |
刘旭强 |
Grinding granularity prediction based on improved particle swarm optimization and gray RBF neural network model |
CCDC,2018 |
EI |
2018 |
26 |
张勇 |
Prediction of grinding granularity based on the combination of grey model and neural network |
CCDC,2018 |
EI |
2018 |
27 |
刘历铭 |
Classification Method Based on Global and Local Support Vector Machine |
CCDC |
EI |
2018 |
28 |
赵楠楠 |
The Recognition of RMB Serial Number Based on CNN |
CCDC2018 |
EI |
2018 |
29 |
徐建英 |
A Position Observer Design for Interior Permanent Magnet Synchronous Motor |
ccdc2018 |
EI |
2018 |
30 |
常凤筠 |
ATM Safe Electronic Combination Lock Control System Based on ARMV7 |
2018CCDC |
EI |
2018 |
31 |
汪玉坤 |
Design of Water Level Control System High Pressure Heater in Power Plant Based on Honeywell TPS |
30th Chinese Control and Decision Conference (2018 CCDC) |
EI |
2018 |
32 |
王傲翔 |
Temperature Optimization Setting Model of the Reheating Furnace on 1700 Line in Tangsteel |
Proceedings of the 30th Chinese Control and Decision Conference |
EI |
2018 |
33 |
刘辉 |
Backstepping-based robust H∞ tracking control design for a class of stochastic nonlinear systems |
Proceedings of the 30th Chinese Control and Decision Conference |
EI |
2018 |
34 |
Yang, MIn |
The effects of enterprise staff safety consciousness based on cellular automata model |
Proceedings of the 1st International Conference on Intelligent Human Systems Integration |
EI |
2018 |
35 |
Yun-lu Zhang |
Guidance of enterprise team division based on security awareness and interaction |
Proceedings of the 1st International Conference on Intelligent Human Systems Integration |
EI |
2018 |